Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-551002.png)
--> Remove supports before lowering.
1. Lever selector cable off the ball pin and disengage from support bracket.
Selector cable
2. Place transmission jack under the transmission.
3. Unscrew fastening screws between the transmission and the transmission support.
Transmission jack screws
Information: The fastening nuts of the transmission support must never be loosened at the hydraulic mount because otherwise the transmission
brackets will be damaged.
4. Unscrew fastening screws between the body and the hydraulic mount -arrows-.
A - Transmission support
B - Hydraulic mount
C - Fastening nut (never loosen)
Transmission support
5. Disconnect the plug connection for the multi-function switch.
