Boxster S (987) F6-3.4L (2008)
/f6-3.4l/Page-1096002.png)
Installing sensor for fluid level display
1. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -arrows A- and press the rubber seal into the tank -arrow B- until it is
felt to engage.
2. Apply a suitable rubber lubricant (tyre mounting paste) to the sealing surface -arrows A- and press the sensor for fluid level display into the rubber
seal -arrow B- until the sensor is felt to engage.
Subsequent work
Install reservoir for windscreen washer.
