Cayenne (92A) V6-3.6L (2011)
INFORMATION:
-
Due to the large number of cable attachments, not all cable attachments can be described and illustrated.
-
When positioning the dashboard support, make sure that wires or plug connections are not jammed.
-
Before securing the dashboard support, make sure that all lines and plug connections are routed correctly.
1. Get another mechanic to help you position the dashboard support in such a way that the wire harnesses can be clipped in.
2. Install dashboard support.
2.1 Tighten two fastening nuts at the left for securing the dashboard support to the body -3- to -> Tightening torque: 20 Nm (15 ftlb.).
2.2 Tighten one fastening nut -3- at the right for securing the dashboard support to the body to -> Tightening torque: 20 Nm 15 ftlb.).
2.3 Tighten four fastening screws on the centre tunnel -2- to -> Tightening torque: 20 Nm (15 ftlb.)+/-15 %.
2.4 Tighten fastening screw securing engine compartment to dashboard support -arrow- to -> Tightening torque: 20 Nm (15 ftlb.)+/-15 %.