Cayenne (92A) V6-3.6L (2011)
/v6-3.6l/Page-88007.png)
3. Preparing bonding areas (support adhesive).
INFORMATION: Do not apply zinc powder paint to the bonding areas.
4. Coat all spot-weld flange areas with zinc powder paint.
Preparing connection areas of body for installing roof
1. Clean welding and sealing areas.
1.1 Clean the body connecting flanges of underbody protection, adhesive residue and paint in the marked areas.
1.2 Grind the connecting flanges until bare on both sides.
2. Preparing bonding areas (structural adhesive).
