Cayenne (92A) V6-3.6L (2011)
Cowl: Service and Repair
Removing And Installing Cross Panel
Preliminary work
Preliminary work for left cross panel
1. Remove cowl panel cover.
2. Remove front cover (engine compartment) at the left.
Preliminary work for right cross panel
1. Remove wind deflector cover.
2. Remove front cover (engine compartment) at the right.
3. Remove DME control unit.
Removing cross panel
1. Unclip plug connections -1- from the bracket.
2. Unclip wire harness -2- from the bracket.
3. Unscrew three fastening screws -3-.
4. Lift cross panel up and remove it -A-
Removing right cross panel
1. Unclip plug connections -1- from the bracket.