Cayenne (9PA) V6-3.2L (2006)
4. Pull the oil pump drive from the cylinder block with a rotary movement.
5. Using a suitable tool (e.g. pointed-nose pliers, magnet), pull the drive shaft of the oil pump from the cylinder block.
Remove oil pump drive at rear
Note:
^
If you now want to take out the intermediate shaft, you will have to remove the engine ' and the timing chains' Removing timing chain'.
^
The fastening screws of the intermediate shaft thrust plate will probably be destroyed during disassembly as they are bonded in.
6. Remove fastening screws of the intermediate shaft thrust plate.