Cayenne (9PA) V6-3.2L (2006)
3. Loosen the catalytic converter holder on the body -left arrow-.
4. Remove catalytic converter. The metal seal must be replaced.
Installing (main) catalytic converter
NOTE: Replace seals, fastening nuts and clamp.
1. Place new metal seal on the flange of the catalytic converter. Slide new exhaust clamp onto the exhaust pipe.
2. Place catalytic converter in installation position. Place new copper nuts on the studs of the catalytic converter.
3. Position the catalytic converter holder on the body (M8 screws) -left arrow-.