Cayenne (9PA) V6-3.2L (2006)
/v6-3.2l/Page-1149086.png)
Installing main wiring harness
Installing main wiring harness - dashboard area
1. Press wire harness with wiring duct into pedal block -Arrow A-until locking tabs -B- are felt to engage.
2. Apply a suitable rubber lubricant (tyre mounting paste) to rim of centre rubber sleeve -A- and press in rubber sleeve until it is felt to engage in the
firewall. -Arrow B-.
3. Apply a suitable rubber lubricant (tyre mounting paste) to rim of left rubber sleeve -C- and press in rubber sleeve until it is felt to engage in the
firewall -Arrow D-.
4. Fasten line to the clip with a new tie-wrap -A-.
