Cayenne GTS (9PA) V8-4.8L (2008)
INFORMATION: The number of plugs can vary, depending on the vehicle equipment.
1. Release the connector -a, b and c- of the damaged antenna lead on the affected components -arrows- and disconnect. The illustration shows the
connector of the display and operator control unit (PCM2) as an example.
2. Cut off the connector of the damaged antenna lead, insulate, and locate at the main wire harness.
3. Route the new antenna lead along the main wire harness, guide it through the existing cable ducts and tie it to the main wire harness using
tie-wraps -arrows-.