Cayenne GTS (9PA) V8-4.8L (2008)
Installing support for TPM antenna
2. Install TPM antenna.
2.1.
Position TPM antenna -3- on the body -arrow A- and screw down with the fastening screws -2-.
2.2.
Press in connector -1- ( -arrow B- ) until the connector -1- engages securely.
Installing TPM antenna
Information
For offroad package only.
3. Install cap.
3.1.
Check clip nuts -3-, replace if necessary.
3.2.
Position cap -2- ( -arrow- ) and screw down with the fastening screws -1-. -> Tightening torque: 2 Nm (1.5 ftlb.)
Installing cap