Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-842002.png)
4. Release plug -arrow a- and unplug.
Installing gateway control unit
Installing gateway control module
1. Insert the plug until it is felt to engage.
2. Insert the gateway control module with the guide pin in the guide on the glove compartment and clip in.
3. Program gateway control module.
Programming gateway control unit
Programming gateway control module
INFORMATION:
-
If the gateway control module is replaced, the gateway control module must be programmed or coded with the PIWIS tester. This is to adapt the
