Cayenne GTS (9PA) V8-4.8L (2008)
Amplifier: Service and Repair
Removing and installing loudspeaker amplifier
Technical values
Preliminary work
Remove the side-panel lining at rear right.
Removing loudspeaker amplifier
WARNING: Risk of damage to audio system components
-
Remove ignition key and switch off the audio system.
-
Observe the requirements for working with optical waveguides.
INFORMATION: The loudspeaker amplifier is located behind the right rear side-panel lining.
1. Release -Arrow A- and remove -Arrow B- electrical connector from amplifier.
2. Release -Arrow C- and remove -Arrow D- electrical connector for optical waveguide.
3. Undo the four fastening nuts and remove.
4. Lift amplifier up and out.
Installing loudspeaker amplifier
1. Position amplifier on retaining bracket and screw it down with the fastening nuts. - Tightening torque: 4.5 ftlb.