Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-884003.png)
4. Press in the connector until it is felt to engage.
Bose middle-pitch loudspeaker
INFORMATION: Always use the screws and seals contained in the scope of delivery.
1. Position loudspeaker on the cover and secure it with the three fastening screws -2-. - Tightening torque: 1 ftlb.
2. Position cover with loudspeaker on door trim panel and secure it with the three fastening screws -2- - Tightening torque: 1 ftlb.
Bose tweeter
INFORMATION: Always use the screws and seals contained in the scope of delivery.
1. Position loudspeaker on D-pillar trim panel and secure it with the two fastening screws -2-. - Tightening torque: 1 ftlb.
Sealing Bose woofer
The sealing surface of the loudspeaker to which the sealing strip is affixed must be clean and free of grease. Inspect sealing surface of loudspeaker for
damage and deformation.
Check the moulded seal that is already affixed to the new loudspeaker for damage.
1. Remove protective film from sealing strip. Affix sealing strip to loudspeaker, starting in the area of the plug connection.
Subsequent work
