Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-910001.png)
Tow Sensor: Service and Repair
Removing and installing tilt sensor control unit
Preliminary work
1. Remove the side-panel lining at rear right.
Removing tilt sensor control unit
INFORMATION: The tilt sensor is integrated into the tilt control unit and cannot be separately replaced.
1. Switch off ignition and remove ignition key.
2. Undo the two fastening screws -arrows A- and remove tilt sensor.
3. Press detent on plug -arrow a- and pull off plug.
Installing tilt sensor control unit
