Cayenne GTS (9PA) V8-4.8L (2008)
4. Detaching lock actuation.
4.1. Using a narrow screwdriver -5- lever the lock actuation -6- out of the guide on the door handle (-arrow F-).
INFORMATION: For vehicles with Porsche Entry and Drive
-
1. Remove front door sub-frame. Refer to Removing and installing front door sub-frame.
-
2. Remove Porsche Entry and Drive wiring harness.
5. Detaching door handle.
5.1. Pull out door handle -7- slightly (-arrow G-) and then pull to the rear (-arrow H-). This disengages the door handle.
6. Pulling out door handle.
6.1. Swivel door handle -7- out by 90 degrees (-arrow I-) and carefully pull it out (-arrow K-).
6.2. Remove the rubber washers -8-.