Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-925008.png)
1. Light up inside of door with a lamp.
2. Guide the assembly tool T10118 -12- between the securing spring -10- and the lever -11-.
3. The securing spring -10- hooks on to the tool with a rotary movement.
4. Pull the securing spring -10- toward the outer side of the door -arrow L- until the spring can be felt to engage in the locking lug of the lever -13-.
5. Unhook the tool and remove it.
INFORMATION: Pull carefully on the lock actuation to check that it is secured in installation position. Repeat the steps listed above if
necessary.
Removing and installing wiring harness for Porsche Entry and Drive system
1. Releasing wiring harness from the basic door frame.
1.1. Unclip the wiring harness -1- from the basic door frame at the marked positions -arrows-.
2. Remove wiring harness
