Cayenne GTS (9PA) V8-4.8L (2008)
4. Remove the bleeder line from the rear axle transmission.
5. Unclip both brake cables from the Quickfit attachment and remove them from the cable guides. Hang the cables in a suitable place to prevent
damage.
6. Mark the installation position of the cardan shaft -arrow-.
7. Make sure that the cardan shaft does not become kinked (tie it up, -arrow-).
8. Disconnect the plug connections for the level adjustment and headlight levelling systems (-arrow-). On vehicles with differential lock, disconnect
the plug connection on the rear axle transmission.
9. For installation, it is a good idea to mark the installation position of the rear axle housing diagonally in at least two places on the body. To do this,
place the marks vertically with respect to the floor of the body using a felt-tip pen (e.g. mark along the rear axle housing mount with the pen).