porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Dashboard Cover on the Driver's Side|Page 5484 > < Removing and Installing Dashboard Cover on the Driver's Side|Page 5482
Page 3
background image

5. Push the ignition switch -2- through to the inside -arrow C-.

6. Remove top section of the steering column trim. To do this, adjust the steering column downward and to the rear.

7. Disengage the holding straps -3- on the top section of the steering column trim -4- using a screwdriver. To do this, the steering wheel must be

turned 90 degrees from the middle position to the left and then 180 degrees to the right.

8. Lift the top section of the steering column trim -4- at the rear -arrow D- and pull it out of the holding straps -arrow E-.

Removing and Installing Dashboard Cover on the Driver's Side|Page 5484 > < Removing and Installing Dashboard Cover on the Driver's Side|Page 5482