Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-291004.png)
Pulling out intake socket
2.3.
Use a hook or assembly tool T10118 to reach into the brass spokes of the thermostat insert and pull it out.
Removing thermostat insert
Installing coolant regulator
Information
The seals on the intake socket must be replaced.
Information
Damaged thermostat inserts must be replaced.
Information
000 043 204 68 (Status 02/07) "Kluber Syntheso GLEP 1" is a neutral-reaction assembly grease that can be used for connection pieces and sealing
rings in oily or water-carrying areas.
Use "Kluber Syntheso GLEP 1" very sparingly. Components and lubrication points must only be coated lightly and excess grease must be
removed. Excess grease can result in leaks.
"Kluberplus S06-100" is a water-soluble assembly gel with the number 000 043 205 93 (status 06/08). This must always be used for the sealing
rings on the intake socket between the water pump and thermostat housing. It must be diluted 50:50 with water.
1. Lubricate the sealing ring for the thermostat insert and the two sealing rings for the intake socket sparingly with "Kluberplus S06-100" assembly
gel 000 043 205 93 (status 06/08).
2. Push thermostat insert through the opening in the crankcase and into the thermostat housing.
Inserting thermostat insert
