Cayenne GTS (9PA) V8-4.8L (2008)
Uniform mounting on camshafts
9. Position the tool with valve cover screws in order to screw the staking tool onto the cylinder head uniformly. The tool can either be fixed directly
on or at a slight distance from the cylinder head, depending on the component tolerances of the camshafts or at the cylinder head. A visual
inspection with a pocket lamp is sufficient, if necessary. The crucial factor is for the distance to be equal on both sides. The valve cover screws
must be fitted hand-tight.
Staking tool screwed uniformly on cylinder head
10. The staking tool is crooked on the cylinder head. The crucial factor is for the distance to be equal on both sides. This is an incorrect setting that
could easily be overlooked.
Crooked, unequal tool position on cylinder head
Setting the timing for camshafts
Notice
Incorrect handling of crankshafts
Risk of damage to the timing system
-
Never turn the crankshaft against the rolling direction or when the chain tensioner is removed.
-
Proceed carefully with your work.