Cayenne GTS (9PA) V8-4.8L (2008)
Timing chain and sprockets
1 - Double-chain camshaft drive
2 - Camshaft sprocket
3 - Screw, M12 x 140; as of October 2008: M12 x 110. Tighten fully after setting the timing.
4 - Deflector rail
5 - Screw, M8 x 35
6 - Camshaft-to-camshaft guide pad
A - Direction of travel
Installing camshaft timing gear (sprocket)
Notice
Incorrect handling of crankshafts
Risk of damage to the timing system
-
Never turn the crankshaft against the rolling direction or when the chain tensioner is removed.
-
Proceed carefully with your work.
-
Only turn the engine at the crankshaft.
-
Reset the timing after working on the camshaft.
-
Observe general warning notes and working regulations.
Timing chain and sprockets
1 - Double-chain camshaft drive
2 - Camshaft sprocket
3 - Screw, M12 x 140; as of October 2008: M12 x 110. Tighten fully after setting the timing. Tightening parameters are identical.