Cayenne GTS (9PA) V8-4.8L (2008)
Camshafts, cylinders 5 to 8
1 - Switching tappet (oil with engine oil)
2 - Bucket tappet (oil with engine oil)
3 - Camshaft (intake)
4 - Hydraulic valve for variable valve lift control
5 - Screw, M5 x 12
6 - Camshaft (outlet)
7 - Stopper
8 - Mounting saddle, cylinders 5 to 8
9 - Stopper
10 - Bearing surfaces (oil with engine oil)
A - Direction of travel
Removing hydraulic tappets
Information
If the hydraulic tappets are to be re-used, they must be marked according to installation position using a water-resistant felt-tip pen and set aside in
such a way that they cannot be mixed up!
If the hydraulic tappets are to be re-used, they must be installed at the same position!
1. Pull the hydraulic tappets out of the cylinder head one after the other and set them aside in such a way that they cannot be mixed up.
Hydraulic tappets