Cayenne GTS (9PA) V8-4.8L (2008)
4 - Screw, M6 x 40
5 - Stopper; test connection
6 - Sealing ring
A - Direction of travel
2. Screw adapter for oil-pressure gauge -1- with sealing ring -2- into the measuring point. Carefully tighten to max. 10 Nm (7.5 ftlb.).
Adapter in measuring point
Adapter setup
3. Screw oil-pressure gauge -3- onto the adapter -2-. Counter screw torque using an open-ended wrench -1-.
Oil-pressure gauge on adapter
4. Move oil-pressure gauge upwards into position. When doing this, make sure the hose is not touching any rotating components.