Cayenne GTS (9PA) V8-4.8L (2008)
3. Tighten the fastening screw on the air cleaner housing. - Tightening torque: 10 Nm (7.5 ftlb.)
4. Replace the air guide on the air cleaner housing from the wheel well. Check that the air guide is installed correctly. Lubricate the bulb of the air
cleaner housing with glycerine if necessary to make fitting easier.
5. Secure ground point, fit power-steering supply tank and insert oil dipstick.
Air cleaner housing for V8
1. Guide the air cleaner housing into the engine compartment at an angle from above.
8. Introduce the two retaining bolts on the underside into the take-up bores in the body. Check the wheel well to make sure that the rubber washers
are present and ensure that the bolts are properly fitted.
9. Tighten the fastening screw on the air cleaner housing. - Tightening torque: 10 Nm (7.5 ftlb.)