Cayenne GTS (9PA) V8-4.8L (2008)
INFORMATION: If the working height of the vehicle has to be changed due to further work, the transmission support must be re-fitted using the old
bolts.
7. Refit the transmission cross member using the old screws so that you can remove the transmission jack from under the vehicle.
Removing main catalytic converter on cylinder bank 5 to 8
CAUTION:
Danger of burns from hot exhaust system
-
Do not remove the exhaust system until it has cooled down.
-
Wear protective gloves.
1. Remove the transverse strut. Remove screws -arrows- (don't forget the centre screw).
2. Release the connecting clamps between the catalytic converters and the exhaust system. Then slide the clamps backwards onto the exhaust system.
The exhaust clamps must not be used again.