porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Air Register > < Removing and Installing Servo Motors|Page 4211
Page 1
background image

Air Duct: Service and Repair

Removing and installing air vent at door

Removing air vent at door

1. Open the doors and run a plastic spatula between the cover and dashboard and remove the cover.
2. Unlock and disconnect the electrical plug connection.

3. Carefully insert plastic spatula from the side between air vent and instrument panel, and lever air vent out.

Installing air vent at door

1. Position air vent at outer edge from the side and press into instrument panel. Push air vent in until it can be felt to engage.

2. Connect electrical plug connection.
3. Position the cover and press on until the cover clips engage.

Air Register > < Removing and Installing Servo Motors|Page 4211