porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4254 > < Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4252
Page 2
background image

1. Release the plug -arrows A- and pull off -arrow B-.

2. Unscrew fastening screw -arrows 1-.
3. Unscrew the fastening nuts -arrows 2- and remove the cover.

4. Release the line holder -arrow A-, open it -arrow B- and unclip the fuel line -arrow C-.

INFORMATION:  Before disconnecting the fuel line, it is essential to observe the safety instructions.

5. Release the clamp lugs -arrow A- on the fuel pump and on the connection point in the wheel housing -arrow B-.
6. Pull out the line on both ends of the connections -arrows C-.

7. Press out the line with the rubber grommet -arrow A- inwards -arrow B-.
8. Remove the fuel line first to the rear -arrow C-, and then downward -arrows D-. If necessary, twist the fuel line slightly when removing it.

Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4254 > < Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4252