Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-758005.png)
9. Fold back rear seat -Arrow A-, press front edge downwards -Arrow B- and push to rear -Arrow C-.
10. Press fuel tank upward -arrow- and tighten the fastening screws -Arrows 4-. - Tightening torque: 24 ftlb.
11. Secure cover with fastening screws -Arrows 3-. - Tightening torque: 1.5 ftlb.
12. Fill the fuel line.
Installing fuel line - wheel housing connection to heater
1. Push fuel line onto the adapter -Arrow A- and fasten with a new clamp -Arrow B-.
2. Press fuel line into retaining clip -Arrows C-.
INFORMATION: The direction of travel is shown by an arrow with the designation "x"
3. Push on connector -Arrow A- until the locking tabs -Arrows B- are felt to engage.
