porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4260 > < Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4258
Page 2
background image

3. Undo fuel line on tank.

3.1. Release plug-in coupling -arrow A- and pull the fuel line off the connection -arrow B-.

3.2. Remove fuel line from the bracket -arrow C-.

4. Raise the vehicle.
5. Remove cover plate.

5.1. Unscrew fastening nut -1-.

5.2. Unscrew fastening screws -2- and remove cover plate -arrow-.

6. Release connector -arrows A- and pull it off the fuel pump -arrow B-.

7. Pull fuel pump together with the rubber sleeve off the holder -arrow-.

INFORMATION:  Before disconnecting the fuel line, it is essential to observe the safety instructions.

Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4260 > < Removing and Installing Fuel Line - Wheel Housing Connection to Heater|Page 4258