Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-780003.png)
3. Push the coolant hoses onto the heat exchanger -arrows A- and attach with the spring-band clamps -B-.
4. Install both servo motors for air flow.
5. Tilt in the auxiliary air-conditioning unit on the top side -arrows- and screw down with the fastening screws -1-. - Tightening torque: 6 ftlb.
6. Push the air duct into the auxiliary air-conditioning unit -arrow- until the air duct is felt to engage.
Subsequent work
1. Install rear side trim panel.
2. Top up engine coolant.
