porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Front Evaporator|Page 4383 > < Removing and Installing Front Evaporator|Page 4381
Page 3
background image

4. Press latch on electric connector for fan -D- -Arrows a- and pull off the connector.

5. Press latch on electric connector for servo motor -E- -Arrow a- and pull off the connector.

6. Lever off the holder -F- for the wiring harness from the heater/air-conditioning unit with a screwdriver.

7. Lever off the holder -G- for the wiring harness from the heater/air-conditioning unit with a screwdriver.

8. Turn temperature sensor -H- 90° and remove from heater/air-conditioning unit. Remove electric wiring harness and place it on the air distributor.
9. Remove heater/air-conditioning unit.

Removing fan housing

Removing and Installing Front Evaporator|Page 4383 > < Removing and Installing Front Evaporator|Page 4381