porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Expansion Valve|Page 4405 > < Removing and Installing Expansion Valve|Page 4403
Page 3
background image

4. Position refrigerant lines on expansion valve and press into place - do not tilt.

5. Carefully push refrigerant lines onto expansion valve (do not tilt) and tighten with the two fastening screws. - Tightening torque: 7.5 ftlb.

Subsequent work

1. Install wiper arms.
2. Install cowl panel cover.
3. Fill in refrigerant.

Removing and Installing Expansion Valve|Page 4405 > < Removing and Installing Expansion Valve|Page 4403