Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-793002.png)
Removing the condenser-evaporator line
Removing the (A - B) line on the condenser - evaporator
CAUTION: Danger of injury from contact with the refrigerant
-
Observe safety regulations when working with refrigerant.
INFORMATION: The condenser - evaporator line can only be removed together with the compressor - evaporator line.
1. Remove refrigerant by suction.
2. Press release on electrical connector -arrow A- and disconnect from pressure switch.
3. Undo two fastening screws for refrigerant lines on expansion valve.
4. Pull out the refrigerant lines from the expansion valve.
