Cayenne GTS (9PA) V8-4.8L (2008)
2. Carefully clip in the connecting lines of the refrigerant lines into the holder.
3. Attach the refrigerant lines in the engine compartment to the connections (do not tilt) and screw down using the fastening screws -1-. - Tightening
torque: 9 ftlb.
4. Position refrigerant lines on wheel arch without tension.
5. Position the pressure damper of the compressor - evaporator line and the condenser - evaporator line.
6. Place the three fastening clamps onto the threaded pins and screw down using the three fastening nuts -3-. - Tightening torque: 6 ftlb.
7. Plug in the refrigerant line from the compressor on the pressure damper (do not tilt) and screw down with the fastening screw -1-. - Tightening
torque: 9 ftlb.
8. Engage the refrigerant lines in the holder on the wheel arch, close them, and screw down using the fastening screw -2-. - Tightening torque: 1 ftlb.
9. Engage mount on the refrigerant line.