Cayenne GTS (9PA) V8-4.8L (2008)
3. Unscrew the fastening screws -4- for the refrigerant lines -A- and -B-.
4. Unscrew the fastening screws -5- of the support for the refrigerant lines -A-, -B- and coolant lines -C-.
5. Unclip lines -A, B, C- from the support.
6. Unscrew the fastening screws -4- for the refrigerant lines -A-, -B- and for the coolant line -C-.
7. Unscrew the fastening screws -2- for the refrigerant lines, then seal the refrigerant lines, -A- (low pressure) and -B- (high pressure), and the
connections with plugs.
8. Pull out refrigerant lines -A- (low pressure) and -B- (high pressure) together. Unclip lines from the retaining clips.
Removing the rear vehicle floor suction line
CAUTION: Danger of injury from contact with the refrigerant
-
Observe safety regulations when working with refrigerant.
1. Remove refrigerant by suction.
2. Unscrew the fastening screws -2- for the refrigerant lines, then unclip the refrigerant lines -A- (low pressure) and -B- (high pressure) from the
support -D-. Seal the connections and refrigerant lines with plugs.
3. Unscrew the fastening screws -4- for the refrigerant lines -B- and for the coolant line Kuhlmittelleitung -C-.