porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Receiver Dryer > < Removing and Installing Heater/Air-Conditioning Unit|Page 4448
Page 3
background image

3. Screw down the air guides using the fastening screws -1- and the fastening nuts -2-. Tightening torque: 1 ftlb.

4. Push the air duct into the auxiliary air-conditioning unit until the air duct engages.

5. Place on the centre console vent and screw down with the fastening screws -1-. - Tightening torque: 1 ftlb.

Receiver Dryer > < Removing and Installing Heater/Air-Conditioning Unit|Page 4448