Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-1032001.png)
Hazard Warning Switch: Service and Repair
Removing and installing hazard warning light switch
Preliminary work
1. Remove PCM.
2. Remove radio.
Removing hazard warning light switch
1. Switch off ignition and remove ignition key.
2. Reach into the opening left by the removed PCM or radio, press the two retaining clips -arrows 1- together and remove the switch -arrow 2- to the
front.
3. Press locking element of plug connection and remove connector.
Installing hazard warning light switch
