Cayenne GTS (9PA) V8-4.8L (2008)
Oil drain plug
2. Replace sealing ring on oil drain plug and fit oil drain plug. - Tightening torque: 50 Nm (37 ftlb.)
3. Fill in engine oil of the stipulated viscosity and quality. Oil filling capacity without oil filter - Filling capacity: 8.5 liters; oil filling capacity with oil
filter - Filling capacity: 9.0 liters
Removing and installing oil filter
Warning
Hot fluid
Danger of scalding
-
Avoid contact with hot fluid.
-
Wear personal protective gear.
Information
Do not remove the sealing ring with a sharp object.
The oil filter cover contains a cut-out through which the O-ring can be removed.
Position collecting container as close as possible to the oil filter so that no hot oil sprays out at the side!
Have sufficient cleaning cloths ready.
Cover chassis hoses with cleaning cloths.
1. On vehicles with PDCC, loosen the hoses on the oil guide housing.
1.1.
Remove two nuts. -arrows-
PDCC lines
1.2.
Unclip line under air conditioning compressor -arrow-. Lift the lines aside.