porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Removing and Installing Fuse Element In Power Distributor|Page 3331 > < Removing and Installing Fuse Element In Power Distributor
Page 2
background image

5. Fold up carpeting and unscrew fastening nuts -arrow 2- from battery ground strap on the body.
6. Route or isolate ground strap so that all contact with a ground carrier (e.g. body, seat frame) is avoided.

INFORMATION:  Only for vehicles with auxiliary battery

7. Release cover -arrows A- and fold it up -arrow B-.
8. Unscrew fastening nut -3- and remove line for auxiliary battery -arrow C-.

9. Lever off lid from power distributor using a screwdriver -a-.

10. Unscrew the two hexagon nuts -4- from the blown fuse element and remove the element.

Installing fuse element in power distributor

Removing and Installing Fuse Element In Power Distributor|Page 3331 > < Removing and Installing Fuse Element In Power Distributor