Cayenne GTS (9PA) V8-4.8L (2008)
4. Undo both fastening screws -2- and remove cutoff relay -arrow-.
Installing cutoff relay for auxiliary battery
1. Position cutoff relay in installation position -arrow- and screw down with the two fastening screws -2- - Tightening torque: 4.5 ftlb.
2. Place the lines on the threaded bolts -arrows- and tighten with the two fastening nuts -1- - Tightening torque: 12 ftlb.
3. Close covers -Arrows A- until locking tabs are felt to engage -B-.
4. Push in connector -Arrow A- until the locking tabs -B- are felt to engage.
Install auxiliary battery.