Cayenne GTS (9PA) V8-4.8L (2008)
4. Attach the line for the additional battery to the threaded bolt -arrow A- and secure with the fastening nut -3-. - Tightening torque: 20 Nm (15 ftlb.)
5. Close the cover -arrow B- until the locking lugs -arrows C- engage securely.
1. Fold carpeted floor forward -arrow A-, place battery ground strap on the body -arrow B- and secure with the fastening nut -1-. - Tightening torque:
20 Nm (15 ftlb.)
2. Move the seat in its folded position towards the rear -arrow A- and then tip it forward -arrow B-.
3. Tighten fastening screws -1-. - Tightening torque: 45 Nm (33 ftlb.)
4. Clip in the right and left carpet cover -arrows- until they engage securely.
5. Clip in the front seat trim at the front seat frame and at the side trim panel -arrow A-.
6. Press the front seat trim down -arrow B- until the locking lugs engage securely on the seat frame.