porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3441 > < Procedures|Page 3439
Page 5
background image

9. Unclip wire harness at the retaining clips close to the mounting for the right headlight -arrows-.

10. Release connector on TPM transmitter (trigger) -14 and 15- and pull it off.

11. Pull off connector on angle sensor for headlight levelling system at the left and right -16 and 17-.

11.1. Release connector on angle sensor for headlight levelling system at the left and right -arrows A- and pull it off -arrow B-.
11.2. Remove tie-wrap on the left side for fixing the wire harness in place on the refrigerant line -arrow C-.

12. Pull off connector on servo valve -18-.

12.1. Release connector on servo valve -arrow A- and pull it off -arrow B-.

13. Release connector for additional heating -19- and pull it off.
14. Release plug connection on tank for windscreen washer system -20- and disconnect it.

15. Pull off plug connection for ABS sensor and brake pad wear indicator at the left and right -21 and 22-.

15.1. Release plug connection for ABS sensor and brake pad wear indicator in the left and right wheel housing -arrow A- and pull it off -arrow B-.
15.2. Unclip connector socket for ABS sensor and brake pad wear indicator -arrow C-.
15.3. Unclip wire harness at the three retaining clips on the left and right -arrow D-.

Procedures|Page 3441 > < Procedures|Page 3439