Cayenne GTS (9PA) V8-4.8L (2008)
33. Remove rubber sleeve -42- on the centre firewall.
33.1. Unclip wire harness from the centre firewall at the retaining clips -arrow A-.
33.2. Remove rubber sleeve on the centre firewall in direction of the interior -arrow B- and remove wire harness.
34. Remove main wire harness - dashboard area and centre console.
Installing wire harness in engine compartment
1. Install main wire harness - dashboard area and centre console.
2. Fit rubber sleeve -42- on the centre firewall.
2.1. Push wire harness through from the interior towards the engine compartment and fit rubber sleeve on the centre firewall -arrow A-.