Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-628044.png)
15. Connect plug connection (right of DME control module) -Arrows A- until locking tab -B- is felt to engage.
16. Push plug connection into clip -Arrow C- until locking tab -D- is felt to engage.
17. Place line (upper side member) in installation position -Arrows A- and close clips -Arrows B- until locking tabs are felt to engage.
18. Fit filler neck of reservoir for windscreen washer system.
19. Push connector onto coolant reservoir -Arrow B- until locking tabs -B- are felt to engage.
20. Push connector onto air flow sensor -Arrow A- until locking tab -B- is felt to engage.
21. Place line in installation position -Arrow C- and close clip -Arrow D- until locking tab is felt to engage.
22. Place line (wheel housing) in installation position -Arrow A- and close clips -Arrow B- until locking tabs are felt to engage.
23. Connect plug connection for ABS sensor and brake pad wear indicator -Arrow C- until locking tabs -D- are felt to engage.
