Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-628057.png)
Only for vehicles with electric adjustment fitting.
48. Press down protective cover (B-pillar) on connector -Arrow A- and maintain in this position.
49. Release connector -Arrow B- and pull off -Arrow C-.
50. Unscrew fastening nut -1- and remove ground straps together with twist lock -a- -Arrow D-.
51. Cut tie-wrap -a- (B-pillar).
52. Unclip cover at the top -Arrow A- and remove -Arrow B-.
A-& B-pillar
53. Release wire sleeve with a small screwdriver -Arrows A- and press away to the rear -Arrow B-.
54. Release connector for door wire harness -Arrows C- and pull off -Arrow D- connector.
A-& B-pillar
55. Release socket bracket -Arrows A- and remove -Arrow B-.
56. Release sockets -Arrows C- and pull out to the rear -Arrows D-.
57. Unclip line -arrows- (lower B-pillar).
