Cayenne GTS (9PA) V8-4.8L (2008)
3. Connect line (central electrical system power distributor) to threaded bolt -Arrow A- and tighten with the fastening nut. -2- - Tightening torque: 4.5
ftlb.
Only for vehicles with auxiliary battery
4. Connect line to threaded bolt -Arrow B- and tighten with the fastening nut. -3- - Tightening torque: 12 ftlb.
5. Close cap -Arrow C- until locking tabs -a- are felt to engage.
6. Push connector onto airbag sensor at B-pillar.
7. Clip in line -arrows- (lower B-pillar).
A-& B-pillar
8. Push sockets into socket bracket -Arrows A- until locking tabs -B- are felt to engage.
9. Push in socket bracket -Arrow C- until locking tabs -D- are felt to engage.
A-& B-pillar
10. Push in the connectors -Arrows A- until locking tabs -B- are felt to engage.
11. Push on wire sleeve -Arrow C- until locking tabs -D- are felt to engage.