Cayenne GTS (9PA) V8-4.8L (2008)
Only for vehicles with electric adjustment fitting.
52. Press down protective cover on connector (B-pillar) -Arrow A- and maintain in this position.
53. Release connector -Arrow B- and pull off -Arrow C-.
54. Unscrew fastening nut -1- and remove ground straps together with twist lock -a- -Arrow D-.
55. Unclip line -arrows- (lower B-pillar).
A-& B-pillar
56. Release wire sleeve with a small screwdriver -Arrows A- and press away to the rear -Arrow B-.
57. Release connector for door wire harness -Arrows C- and pull off -Arrow D- connector.
A-& B-pillar
58. Release socket bracket -Arrows A- and remove -Arrow B-.
B-pillar only
59. Release sockets -Arrows C- and pull out to the rear -Arrows D-. Then pull line out of B-pillar.