porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 3545 > < Procedures|Page 3543
Page 109
background image

13. Pull off connector on sensor for lateral acceleration -11- and circulating pump connector -10-.

13.1. Release connector on sensor for lateral acceleration in left wheel housing -arrow A- and pull off - arrow B-.
13.2. Release connector on the circulating pump -arrow C- and pull off -arrow D-.
13.3. Unclip wire harness on the three retaining clips -arrows E-.

14. Remove radiator tank at front left.

15. Remove rubber sleeve from the bulkhead.

16. Unclip wire harness in plenum panel on the four retaining clips.
17. Remove rubber sleeve -16- on the left firewall.

17.1. Remove rubber sleeve on the left firewall in direction of engine compartment and remove front left wire harness.

Sub-part - installing front left wire harness

Procedures|Page 3545 > < Procedures|Page 3543