Cayenne GTS (9PA) V8-4.8L (2008)
/v8-4.8l/Page-628119.png)
11. Remove connector from coolant expansion tank -11-.
11.1. Release connector on coolant reservoir -arrows A- and pull it off -arrow B-.
12. Pull down wire harness on upper side member from the four clips -arrows A-.
13. Unclip wire harness on the two retaining clips -arrows B-.
14. Disconnect bonnet wire harness plug connection -12-.
14.1. Release retaining clips -arrow a- and slide off the bonnet wire harness plug connection -arrow B-.
14.2. Release plug connection for bonnet wire harness -arrow a- and disconnect it -arrow C-.
15. Unclip wire harness on the retaining clips on upper side member.
