Cayenne GTS (9PA) V8-4.8L (2008)
Cylinder bank 5 to 8
1. Carefully coat the thread of the oxygen sensor with 000.043.207.07.
6. Use a suitable tool to screw the oxygen sensor into the exhaust manifold by hand from below. -1- Screw on oxygen sensor correctly. - Tightening
torque: 45 Nm (33 ftlb.)±5 Nm (±3.5 ftlb.)
CAUTION:
The oxygen sensor cable can be damaged if twisted.
-
Change in emissions.
-
Check Engine light comes on.
-
Always expose oxygen sensor cable so that the wire can turn when unscrewing or screwing in the sensor.
-
Do not kink cable.
7. Route oxygen sensor cable around the exhaust manifold and clip it in.